NEO10I LINEARRAY
-
This line array speaker, known as the NEO10I, is a high performance touring system suitable for theaters and multi-purpose halls. NEO10I is equipped with a compact bi-amp system and neodymium high-sensitivity drivers for maximum headroom. Its small enclosure is lightweight and has a high SPL to volume ratio.
NEO10I PASÄ°VE LÄ°NEARRAY
PASIVE
Frequency Response (-3 dB)1: 59 Hz - 17 kHz
Horizontal Coverage: 90° or 120°
Vertical Coverage:Array dependent
Rec. High-Pass Frequency: 52 Hz
Max SPL2: 131 dB Peak Configuration:
Passive Crossover Frequency: 1500 Hz
Axial Sensitivity: 100 dB (1 W/1 m)
Power Handling3: 500 W Continuous, 1000
Peak Impedance: 8 Ω (nominal), 6.4Ω (min)
LF Transducer: 10-in
HF Transducer: 1x, 2-in (51 mm) diaphragm
Connectors: Dual high current Phoenix terminal blocks
Enclosure: 13-ply weather resistant birch
Grille: 16 GA 304 stainless steel with powder coat.
IP Rating: IP55 (fiberglass models only)
Suspension: (8) M10 hard points, (4) on left side
and (4) on right
Color: RAL9003 white and RAL9005 black
Dimensions (H x W x D): 11.8 in x 23.5 in x 14.8 in 300 mm x 600 mm x 376 mm
Net Weight: 27 kg with Flyware
NEO10I ACTÄ°VE LÄ°NEARRAY
SPECIFICATIONS
Configuration:Multipurpose 2-way
Transducers High Frequency Low Frequency:2-inch diaphragm compression driver /10-inch cone transducer
Frequency Response (-6 dB):55 Hz - 18 kHz
Frequency Range (-10 dB):48 Hz - 20 kHz
Nominal Coverage:90° H × 18° V
Maximum SPL (1 meter):135 dB peak
Amplifiers
Power OutputHF: 600 W Class D continuous LF: 600 W Class D continuous
Input Impedance:XLR: 40 kΩ balanced / 20 kΩ unbalanced
Controls :Power, Attenuation, LF Setting
Array Size (1-5), Front LED (Pwr/Limit/Off)
Indicators:Power, Signal, Standby, Limit
Connectors:Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
Cooling:On demand, 50 mm variable speed fan
Amplifier Protection:Thermal limiting, output overcurrent
Transducer Protection: Thermal limiting, excursion limiting
AC Power Input:Universal power supply 100–240 VAC, 50 to 60 Hz
AC Power Consumption:(1/8 Power)100 VAC, 2.3 A /120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material:Impact resistant ABS
Finish:Black or white paint
Grille:Rugged powder coated steel grille
Dimensions (H x w x D):11.8 in x 23.5 in x 14.8 in 300 mm x 600 mm x 376 mm
Net Weight: 42kg
Shipping Weight: 45kg